Protecting and enforcing design rights: Germany
This is an Insight article, written by a selected partner as part of WTR's co-published content. Read more on Insight
German registered designs are governed by the Design Act, which was recently renamed to reflect the fact that German registered designs are now officially called ‘designs’, rather than the previously used ‘aesthetical models’.
Legal framework
German registered designs are governed by the Design Act, which was recently renamed to reflect the fact that German registered designs are now officially called ‘designs’, rather than the previously used ‘aesthetical models’. This is an interesting inconsistency in German law, as the official German name for registered Community designs is still ‘Community aesthetical model’, even in the Design Act itself.
As Germany is a member state of the European Union, the EU Community Designs Regulation applies directly, covering both registered and unregistered Community designs.
International designs registered with the World Intellectual Property Organisation also enjoy protection under the Design Act, provided that Germany is a designated country under the international design application.
Designs filed for registration with the German Patent and Trademark Office (DPMA) are not examined for compliance with the substantive requirements for design protection. The DPMA may review whether they meet these requirements if the design in question is challenged through a nullity request. Design infringement courts may review the requirements for protection if claims are raised in design litigation and the design is challenged through a counterclaim for a declaration of nullity.
Unregistered designs
The Design Act does not provide for national unregistered design rights. However, unregistered design rights may arise on the basis of the Community Designs Regulation. According to the Community Designs Regulation framework, the design in question must have been disclosed within the European Union in a manner that European professionals in the field could have noticed. Unregistered design rights have a limited protection term of three years.
In addition, the enforcement of unregistered design rights requires that the challenged product be the result of copying the original, which involves establishing subjective elements such as knowledge of the original. In practice, knowledge may be assumed by a court if the challenged product is so similar (or identical) to the subject matter of the original design that assuming anything less than prior knowledge of it would be unreasonable.
Registered designs
Any interested person, whether a natural person or corporation, can apply for design registration; whether the applicant is also legally entitled to own the design is a different question. However, the DPMA does not ask on application whether the applicant is entitled to the design’s subject matter. Substantive design law provides that the designer or his or her successor in law is entitled to the design rights.
The registrability of a design’s subject matter hinges on several legal requirements. The following are excluded from registered design protection, pursuant to Section 3 of the Design Act:
- design features that arise exclusively from their technical function;
- design features that must be copied in an exact form and measurements in order to connect the product on which the design is used or into which it is incorporated to another product. However, there is an exception to this exclusion – design features that serve to connect multiple interchangeable parts within a modular system are eligible for registration;
- designs that violate the rules of public order or principles of morality; and
- designs that abusively use badges, signs or emblems of public interest.
Section 4 of the Design Act includes another significant exclusion from design protection. A design that is used on or incorporated into a product that is an element of a complex product (eg, a car) can be considered as new and original only if the element remains visible during its originally intended use. If this first requirement is met, the visible features of the design must themselves meet the requirements of novelty and originality.
Registration fees are €60 for applications filed electronically and €70 for applications filed in hard copy. These fees relate to a single design; if an application covers several designs, each design costs €6 (the minimum fee is €60).
The renewal fees for each registered design (including multiple designs in a single application) vary in accordance with each protection period, as follows:
- sixth to 10th year – €90;
- 11th to 15th year – €125;
- 16th to 20th year – €150; and
- 21st to 25th year – €180.
These figures are based on information provided by the DPMA in August 2016.
Procedures
Design applications may be made by the designer or its representative. The representative can be a patent attorney or attorney at law.
Applications with deferred publication of the design’s subject matter are possible and commonly used. The initial fees for an application with deferred publication are lower: €30 for each design or, in the case of a combined filing, €3 per design (the minimum fee is €30). The fees following publication of the design’s subject matter are €40 for each design or €4 per design in the case of a combined filing (with a minimum fee of €40).
Up to 100 designs can be filed in a single application (Section 12(1) of the Design Act).
The DPMA does not review the substantive requirements for registered design protection when assessing applications, instead examining only the formal aspects of the application (eg, payment of fees, requirements for the grant of a particular date of application). If an application is rejected on such formal grounds, the applicant may file a request for subsequent processing within one month of the application’s initial rejection, during which the applicant can correct any formal errors in the application.
Once the application has been reviewed and any formal errors have been corrected, the design is registered and subsequently published (with deferred publication of the figures, where applicable).
No opposition procedures are available. However, designs that do not meet the substantive requirements for registered design protection can be removed from the register. Only relatively recently did the DPMA begin to accept requests for nullification of registered designs; previously, cancellation or nullification had to be requested from a court by way of a standard lawsuit. The DPMA is now fully competent to handle requests for nullification, while the courts have jurisdiction to nullify a design only where a nullity declaration is sought by way of a counterclaim filed by a defendant in a design infringement suit. As such, the law has been amended to provide that active requests to a court to nullify a design by way of a normal complaint are no longer admissible, and that design infringement litigation must be pending in order for the courts to rule on potential counterclaims for nullification.
Enforcement
Infringement of German registered designs (as with registered and unregistered Community designs) can be challenged by filing a normal action with a court that is competent to hear design cases. Designs are frequently enforced not only by way of normal actions, but also through ex parte preliminary injunction proceedings in urgent cases.
A normal writ of complaint (as well as requests for a preliminary injunction) must provide the court with all facts necessary to determine the question of infringement. Plaintiffs must provide the court with a detailed description of both the allegedly infringed design (eg, noting design features, including which features are more important than others, and the overall impression of the design) and the allegedly infringing product. It is recommended that the plaintiff provide the court with high-quality copies of the design’s subject matter and, if possible, a sample of the allegedly infringing products, so that the required comparisons can be made; photographs of the allegedly infringing products may be insufficient in this regard.
The plaintiff must also provide the court with an overview of the relevant prior art. German law provides that protection of a registered design must be assumed in normal design litigation. However, in practice, German courts request that plaintiffs disclose and describe in detail the relevant prior art. One reason for this is that the court may be unable to determine the scope of protection of a design (and consequently the question of infringement) without deep knowledge of the prior art. Thus, even if validity is not an issue because the design has not been challenged through a counterclaim, failure to disclose the relevant prior art may prove detrimental to the plaintiff’s case, because the court will be unable to determine infringement. In preliminary injunction proceedings, there is a statutory requirement for the applicant to disclose the prior art so that the court can make an ex parte determination of the strength of a design (and determine the scope of protection).
The normal timeframe for a design infringement suit is around six to nine months before a district court (eg, the Dusseldorf District Court, one of Germany’s most prominent design infringement courts) and another six to 12 months before an appeal court. This general timeframe applies to both registered and unregistered designs, as the courts do not distinguish between the two in terms of diligence and care of judicial review. However, cases involving unregistered designs may take longer, because issues such as whether the design was sufficiently disclosed may be in dispute and may be decided only on the basis of extensive witness testimony.
Ownership changes and rights transfers
Design rights are initially vested in the creator of the design. They may be transferred and assigned through conclusion of a contract. Such contracts are usually made in writing in order to ensure clarity in the terms of the agreement. However, there is no legal requirement for contracts to be concluded in writing.
Design rights can be licensed, although design licensing is not as common as patent licensing. This is likely due to the fact that designs are usually registered because their owners seek an exclusive position on the market, which would be compromised if a successful design were licensed out to a number of third parties or even competitors.
Related rights
The subject matter of designs can also be protected by copyright. Until recently, the Supreme Court regularly held that the requirements for copyright protection are much higher for designs (in that a ‘substantial creation’ is required) than for ‘normal’ works of art, because design protection is usually sufficient in this context. However, the Supreme Court has now changed its position, holding that design and copyright protection may exist simultaneously in many more cases than previously. In this regard, the court held that the requirements for copyright protection are the same for all eligible works of art, and that the category of ‘usable art’ (which may theoretically overlap with design protection) does not merit a stricter standard.
Another parallel cause of action where product design is concerned is unfair competition law. Although not technically deriving from IP rights, claims for unfair copying are regularly affirmed by German courts, even if the subject matter of the litigation is not protected by a separate design right.
Design rights may collide with parallel trademark rights in three-dimensional (3D) marks. However, German courts have established different requirements for the infringement of 3D marks, such as whether the 3D form protected by the trademark is used in its characteristic parts; whereas design infringement relies on whether the overall impression of a design has been used unlawfully.
Krieger Mes & Graf v der Groeben
Bennigsen-Platz 1
40474 Dusseldorf
Germany
Tel +49 211 440 337 0
Fax +49 211 440 337 60
